Here are the 11 best DIY methods for removing deep scratches from your aluminum laptop. Many laptops are made of aluminum alloys. These laptops are better than plastic laptops. The outer body of the computer is made of aluminum. These are some of the most popular and useful laptops nowadays.
How to remove deep scratches from aluminum laptop? You can remove deep scratches from the aluminum laptop by using a cleaner, silver pen, toothpaste, metallic polish, baking soda, and scratch remover tool.
Most of these aluminum laptops come with price tags. The tags remain attached to the computer. These claw marks should be removed from them; otherwise, they can spoil the whole equipment.
Types of scratches
There are three types of claw mark which can occur on the body of an aluminum laptop.
Hairline scratches
These are minor dents, as the name shows that these are very thin in their appearance. Spots of this kind are easily manageable. You can remove these from your laptop by using simple techniques.
Major scratches
These appear clearly on the body of the laptop. Mostly the abrasions are visible. Significant and big dents can be removed from the computer by small techniques. The method of removal needs a little effort.
Deep groves
Deep abrasions on laptops are the most challenging deep spots in terms of removal. These move deep down the surface of the computer. You can remove these scraps, but the process needs more effort as compared to the removal of other blemishes.
Contents
How to remove deep scratches from aluminum laptop?
There are many methods for the removal of deep scratches from your device. All of these methods need time and expertise. A computer is a sensitive device that is why you need to be very careful.
Use cleaner
There is a variety of laptops cleaner available in the market. It does the best job for you in terms of removing the scraps permanently. You can find and buy the cleaners online or from any electronic shop.
You can use a fiber-free cloth and cleaning cloths. All of these fabrics must be dry and clean. You must have a bottle of distilled water with you before starting the process. Now mix small quantities of distilled water and cleaner in a bottle. Spray the mixture on the fiber-free cloth.
You can also directly spray the cleaner on the outer covering. Now rub it gently with the help of fabric. Mostly these can be removed by using this method. After the removal, you can clean it with a dry and clean towel. This method needs minimal effort and time. This is also used to clean the HDMI port on laptops.
Apply toothpaste
The method has multiple abrasive properties. This method can help in removing the graze in a few minutes. The spots can be removed only by using the toothpaste. The whole procedure of application is effortless and less time-consuming.
You can use any toothpaste of your choice in this procedure. Make sure that you are using only a pea-sized amount of toothpaste. The paste helps in removing the marks, but it can be harmful to the color of your microcomputer. Apply this small quantity, rub the paste on the spots with the help of a toothbrush.
The brush must be bristle free; otherwise, it can create more lacerations. Leave the paste for some time. After drying of the paste, remove it by using a wet cloth. The cloth should be fiber-free. Clean the area with a dry and clean towel. This method helps to a great extent for the removal of scraps. The method requires minimal effort and time.
Use silver pen
Silver pens or pencils are specially designed for making blueprints. These pens help in removing the marks on your gadget. You need expertise in performing this method. If you don’t know how to move the silver pen on the surface, you can damage your minicomputer. The method is simple and less time-consuming.
Move the nib of the silver pen of the device. The silver pen or pencil can remove them by just moving the device on them. The pen can hinder the marks of grazes on the surface. The method is beneficial and requires less effort. You can buy a silver pen or silver pencils online.
Use car scratch remover
It is also known as an aluminum scratch remover. This remover is only used for removing grazes. It helps you by hiding and removing all the grooves on your minicomputer.
In this method, you need a lint-free cloth. The cloth can help in the proper application of the remover on the graze. Apply the solution on the lint-free and soft cloth. Rub this wet cloth on the lacerations. The movements of rubbing must be in a circular direction. You can put a small amount of pressure when you rub it on the surface.
You should coat the grazes multiple times. A single layer cannot give you exceptional results like various layering. It works best on the black or colorless surfaces, it cannot remove dents altogether, but it enhances their appearance.
Laptop scratch remover
These are available in readymade forms, or you can make them at home. These removers work well for all surfaces.
Clean your gadget with a fiber-free cloth. You can take a small quantity of baking soda in a bowl. Coat the soda with slices of lemon. Rub these slices on your minicomputer. Slightly press the slices of lemon and squeeze some lemon juice on the scraps. Keep rubbing the slices over the spots until they disappear.
Make sure that the lemon juice does not flow in the cracks of the device. The citrus can cause damage to the internal area of an electrical device. After rubbing, start cleaning your minicomputer. Remove the sticky residues and place your microcomputer to a safer place.
Magical erasers
You can use magic erasers for removing spots of your microcomputer. These erasers are available online, and you can buy them from the shopping cart. The magical erasers help in removing the dents of the surface. These are very effective and work like magic.
The cleaning should be carried out with a fiber-free cloth. Now take this magical rubber and rub it on the surface. Rub the rubbers gently and in circular motions. These erasers help in removing all the scrapes from the surface.
After removing the spots, clean the fibers of the erasers. You should use a dry and clean cloth for cleaning. The cleaning cloth must be fiber-free. These rubbers can damage the paint of the surfaces on hard pressures and rubs. The whole procedure is effective and less time-consuming.
Use charcoal
Make a paste of charcoal with toothpaste. Apply the mixture on a lint-free cloth. Rub the fabric on the grazes in round motions. You can also use a bustle free brush for the application of charcoal on the dents.
This paste works best on black surfaces. The charcoals fill the tiny places of scores. The marks can be eradicated by using this method. The whole procedure is beneficial in the relevance of groves and less time-consuming.
Use baking soda
It is a bleaching agent, and it helps in the removal of spots in an effective way. This method involves the use of baking soda, water, and fiber-free cloth.
In this method, you need to form a paste. Mix a small amount with water, mix them thoroughly to make a firm paste. Dip a fiber-free cloth in this mixture. Rub this wet cloth on the scratches. The movements of grazes should be circular.
Do not leave this paste on the surface for a more extended period. Clean the surface with a dry lint-free cloth. The bleaching procedure is exceptionally helpful in removing and hiding the lacerations. It works best on the colorless surfaces.
Metallic polish
The polish helps in removing the dents from the minicomputers by covering them gracefully. The prices of these metallic polishes are affordable. You can buy this polish from a workshop in a mechanic shop.
The polish can get evenly spread in this way. Metallic polish comes with glue in the package. The glue sticks on the surface of the device. You can use microfiber material for the application. Take a small amount of metallic polish on the soft sponge and rub it.
You can cover all the spots on the surface through the metallic polish. You should form an extra layer of polish on the surface. The extra layer helps in blurring the areas of dents.
When you notice your microcomputer after polishing, it seems like there were no grazes ever. The polish works as a scrubber on the minicomputers. Do not spray it while plugged-in, otherwise, it can make the laptop adaptor hot.
Plastic polish
You can buy plastic polish from an online shop or mechanics. You should be an expert in the application; otherwise, you can harm your device.
For cleaning, you can use dish soap and water. Dip a fiver free soft sponge in the mixture of soap and water. Rub the sponge over the surface of your minicomputer. Clean the surface properly. Dry your gadget with the help of a lint-free cloth.
Spread the layer of polish on the blemishes. When the polish gets dry, you can remove this drop. Plastic polish not only helps in removing the dents but also protects from further occurrence.
If you have bought plastic polish in the form of a scrubber, then the process of application is slightly different. In this method, you can use a delicate and fiber-free material for the application. Put the plastic polish on the delicate equipment and scrub it on the marks. Y
Squeeze the applied polish with the help of soft material. Spread the layer all over the spots finely and smoothly. Plastic polish works its best on the colorless strips.
On dark – the working of polish becomes slightly slow. The plastic polish cannot eradicate all the scratches of your device. If you want to remove the blemishes to its maximum layer, then you should for multiple coats of polish on the spots. The appearance of spots becomes blurry in this way.
Avoid scratches
Cover your keyboard with its sheet. You can protect cover the screen of your gadget with screen covers. It provides protection to screen. You should clean your minicomputer with a lint-free cloth.
You should not put your microcomputer with sharp edges in the bag. The sharp things like chargers and keys can create scraps on the device. Wrap the keyboards with silicon covers to avoid this issue, otherwise, it can make your laptop fan loud.
Place the accessories of a computer in the sleeves associated with it. Keep it on a plane and smooth surface all the time. Protecting your device keeps it liberated from groves, and there is no need for cleaner and other methods for removal.